Operation with touch keys

Accept call

After the indoor station has rung, push the receiver key. This establishes the speech connection to the door station. Push the receiver key again to end the call.

Note:

A call remains active for a maximum of 2 minutes after ringing starts. The door opener also works only within this time span.

If the call is not answered, LED 1 below the receiver key flashes to indicate the ongoing call. The flashing stops as soon as you accept the call.

Mute ringtone

Hold the mute key for 3 seconds until a confirmation tone sounds. Door and floor calls are now muted. The LED below the mute key flashes every 2 seconds to indicate this state.

Note:

Muting ends automatically after 12 hours or after a power failure.

Incoming door calls are still indicated by LED 1 flashing.

Unmute ringtone

Briefly touch the mute key. A signal tone sounds and the ringtone is switched back on.

Open door

Within 2 minutes after ringing starts, push the door-opener key.

Note:

If you push the door-opener key during an active call, the call ends automatically after 10 seconds.

If the indoor station should stay permanently silent, use Mute mode instead of muting the ringtone.